Factory Alarm 07 Tahoe

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91144
Printed Date: May 13, 2025 at 6:49 PM

Topic: Factory Alarm 07 Tahoe

Posted By: djpi01
Subject: Factory Alarm 07 Tahoe
Date Posted: February 28, 2007 at 10:21 PM

hello i have a 2007 tahoe LTZ and i want to put in a aftermarket alarm. does any one have a factory wire diagram or know how to turn the factory alarm off

Replies:

Posted By: Twelvoltz
Date Posted: March 01, 2007 at 7:54 AM

Turning off the factory alarm may be discussed in your vehicle's owner's manual. However if you want to keep the factory security and have it work in conjunction with the after market system pick up a data module. The data module would arm/disarm/lock/unlock and bypass the factory antitheft system without the need for extensive amounts of labor. You can check out one such module here.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: electriqtion
Date Posted: May 24, 2007 at 1:57 AM

I agree, go with the data module and its a much easier install that saves a lot of time. I used a CAN SL-2 databus module and I can use my aftermarket alarm when I press the arm button once, and when I press the arm button twice it arms both aftermarket and factory alarm. Pressing the disarm button once disarms both. (https://bypasskits.fortinautoradio.com/en/products/bypass_kits/can-sl2/?year=2007&make=1&model=670)

-------------
Electriqtion

Print Page | Close Window