Print Page | Close Window

shock sensor wiring viper 5900 sst

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91264
Printed Date: July 07, 2025 at 5:02 PM


Topic: shock sensor wiring viper 5900 sst

Posted By: dirtjumper895
Subject: shock sensor wiring viper 5900 sst
Date Posted: March 04, 2007 at 5:08 PM

I have a viper 5900 sst.  My shcok sensor would only do full triggers and no warn aways so i wired it a little differently. Now I only have warn aways and no full trigger. I drew a diagram of what i did. Could somebody please help me out with what i did wrong here? I want the shock sensor to do warn aways for light hits and full trigger for hard hits. It is a dualstage shock sensor.

Colors mean:

Red- positive

Black - ground

Green-warn away

Blue - full trigger
posted_image




Replies:

Posted By: dirtjumper895
Date Posted: March 04, 2007 at 5:09 PM
posted_image



Posted By: dirtjumper895
Date Posted: March 04, 2007 at 5:10 PM
posted_image



Posted By: dirtjumper895
Date Posted: March 04, 2007 at 8:22 PM

FYI   

I got this situation figured out. It is working how i have it wired right now. I think it wasn't working b/c i had already triggered the NPC system so it wouldn't go into full trigger. 




Posted By: f150fan
Date Posted: March 04, 2007 at 8:52 PM
The green loop side of the wire harness should be plugged into the shock sensor. The other green wire that goes to nothing is for adding additional sensors.


Print Page | Close Window