viper remote for clifford matrix
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91272
Printed Date: April 27, 2024 at 8:25 PM
Topic: viper remote for clifford matrix
Posted By: sporttrac
Subject: viper remote for clifford matrix
Date Posted: March 04, 2007 at 8:44 PM
I have the Clifford Matrix 10.5 (i think), with the LCD remote. Well I broke my LCD and I am able to get a Viper LCD remote a lot cheaper than the Clifford one, so can i use it? are they compatible? Thanks in advanced.
Replies:
Posted By: kgerry
Date Posted: March 05, 2007 at 9:27 AM
the remote for a Viper 5000 would be compatible.... just don't expect to use a Responder remote.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: sporttrac
Date Posted: March 05, 2007 at 3:45 PM
So the display wont work?
Posted By: kgerry
Date Posted: March 06, 2007 at 8:31 AM
the display would work with the proper compatible remote... but the Responder units are FSK and the 10.5X & 5000 are ASK... they are only "Responder looking" not a true Responder remote...... you need a 489 V/X/P remote....... ------------- Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: tattootre
Date Posted: March 21, 2007 at 7:47 PM
i also have a question along the same lines, i have a Matrix 2.5 installed in which i broke the first remote, and have purchased a viper remote and was told it would work, (remote RPN 479v/p/x) after linking the remote i find that only the channel 1 button works, and it locks and unlocks, instead of just locking. and the other buttons don't do anything. is there a way around this?
Posted By: nava94
Date Posted: March 21, 2007 at 9:38 PM
reprogram the remote again and read the instruction it came with. you have programed it to use the lock button to arm and diarm. read the instructions and you will have the lock button arming the alarm and the unlock button disarming the alarm, along with the spare channels on the remote will work okay.
Posted By: tattootre
Date Posted: March 24, 2007 at 8:55 AM
thanks, that worked. i should have done it myself in the first place.
Posted By: kgerry
Date Posted: March 24, 2007 at 1:37 PM
it's usually best when learning a remote to "auto-learn remote"... much quicker and easier.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|