Print Page | Close Window

Wiring a piezo screamer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=913
Printed Date: July 25, 2025 at 8:17 AM


Topic: Wiring a piezo screamer

Posted By: achmed
Subject: Wiring a piezo screamer
Date Posted: May 23, 2002 at 11:38 AM

I need help attaching a piezo siren to my alarm without blowing the siren (I only fried one so far). It says it'll take 6 or 12V amd 150mA. The siren seems to draw more current than it can handle if it's available. How do you guys wire these things up? Do I need to use a resistor? Any help is appreciated.

-Alan




Replies:

Posted By: Velocity Motors
Date Posted: May 23, 2002 at 11:46 AM

Look at this posts. Should help you with your problem:

https://www.the12volt.com/installbay/display_topic_threads.asp?ForumID=3&TopicID=741



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window