programming remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91343
Printed Date: May 09, 2025 at 8:19 AM
Topic: programming remote
Posted By: ashfieldv
Subject: programming remote
Date Posted: March 06, 2007 at 5:49 PM
hi there i have a problem with two systems i recently purchased it is a scytek 5000rs-2w-2way pager system but is appears that the remotes didnt come program with the system so anyone know how to program these remotes...
Replies:
Posted By: ashfieldv
Date Posted: March 06, 2007 at 5:56 PM
hi there i need some help programming two fm2009 pager remotes that i got from this company asianwolf i got 2 lcd 2way pagers but none of them camr programmed to the alarm system does anyone know how to program these remotes......i only know how to program additional remotes this system is similar to the scytek 5000rs system
Posted By: Twelvoltz
Date Posted: March 06, 2007 at 9:40 PM
The system is the same as the Scytek and the remote programming procedure for new remotes is the same as old remotes, these systems come with the remotes preprogrammed to the brain. I would contact the people that sold it to you and ask them about this issue. I did a batch of them a while back and had one that shipped with the wrong antenna, if I remember correctly it had the wrong colored LEDs in it. The antenna the system is supposed to have is tuned to a different frequency. If you contact the people that sold it to you they should be able to offer some assistance.
-------------
Installer, IT support, and FFL. I need less hobbies.
|