astra 777 remote sensor disable

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91453
Printed Date: May 12, 2025 at 8:22 PM

Topic: astra 777 remote sensor disable

Posted By: batmilchone
Subject: astra 777 remote sensor disable
Date Posted: March 09, 2007 at 1:02 AM

Hi,
I'm from Bulgaria and i have Astra 777.
My question is for Remote Sensor Disable function described in manual on page.12 :

To disable the sensor inputs:
1.Arm the system normally
2.Within 5 seconds of Arming the system, press the Arm button again.

It work fine but with the second NO LCD remote transmitter because he have different button for Arm (button 1) and Disarm (button 2).

And my question is :
How can use this function with LCD remote transmitter because he have just one button for Arm/Disarm - pressing once Arm, pressing second time Disarm and the alarm don't disable remote sensor and I'm
forced to bring with me two remote transmitters just for this function?

Best Regards
Nikolai Milev

Replies:

Posted By: audioman2007
Date Posted: March 10, 2007 at 8:58 PM

I have the asianwolf 8000RS which is the same thing as the scytek brands, and the same as your astra 777 but with more features. Your 1-way remote is a 5 button with a carbon fiber look to it, correct? You said that one works correctly. Your 2 way LCD remote should have 4 buttons on the right side of it. The orange button arms, the green disarms, and then you have 2 gray, one with a C and onother with a key on it. Well That is the remote you should have.

Posted By: audioman2007
Date Posted: March 11, 2007 at 8:49 AM

Ok I got the astra 777 and the astra 7T7 mixed up. The 7T7 has the same remotes as what mine does. Does your 1 way remote have 4 buttons on it?

Posted By: batmilchone
Date Posted: March 18, 2007 at 3:38 AM

Hi excuse me for late response.

Here are my remote transmitters:
posted_image

The problem is that on first 1 way transmitter with button 1 - arm and with button 2 - disarm and all is fine, but with second 2 way transmitter I have only one button for this button 3 - arm and pressed again disarm.

bets regards