1996 ford f150 alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91498
Printed Date: April 28, 2024 at 1:01 AM

Topic: 1996 ford f150 alarm

Posted By: fosgate2001
Subject: 1996 ford f150 alarm
Date Posted: March 10, 2007 at 6:01 AM

im working on installing an alarm in a 1996 ford F150. the door lock wires are showing a pink / YELLOW for the lock and a pink/light green for the unlock and it says to reverse the polarity on the unlock wire my alarm has neg output triggers for the door locks wondering do i need to get a relay and reverse polarity on one of the wires the lock or unlock and if so which one if someone could help i would greatly appericate it thanks

Replies:

Posted By: Velocity Motors
Date Posted: March 10, 2007 at 8:31 AM

Negative trigger on the keyless-entry versions and 5-wire on all the rest. 5 wire both the lock and unlock wires.Use drivers switch when testing for switch and motor sides. The wires are much easier to access on the passenger side due to the E-brake blocking the drivers kick.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: fosgate2001
Date Posted: March 10, 2007 at 9:19 AM

the truck has no factory keyless system so what your saying is i need to get 2 relays and reverse polarity on the pink / YELLOW wire--door lock and the pink/light green wire-- unlock how its done in the diagram and how do u tell what side is the switch and what side is the motor how do i go about that??

Posted By: KarTuneMan
Date Posted: March 10, 2007 at 9:22 AM

Cut the wire and put your meter on one end of it, push the switch....if your meter jumps, you got the switch side. posted_image

-------------

Print Page | Close Window