window module, 99 durango
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91517
Printed Date: May 12, 2025 at 3:14 PM
Topic: window module, 99 durango
Posted By: durangor ice
Subject: window module, 99 durango
Date Posted: March 10, 2007 at 6:08 PM
So i got a 4 window rollup/rolldown and i took my door apart and was wondering what wires i connect where. I have a few pics of my door switch panel for all the windows and a pic of the wires goin to the window motor. Just wondering which wires to cut and connect. I seen the diagram but the colors obviously dont match..so just wondering which color wires to cut for my application of a 99 DODGE DURANGO. The picture s are of the FL door. Thanks.
 ------------- 99' Dodge Durango
Replies:
Posted By: master5
Date Posted: March 10, 2007 at 8:44 PM
LF Window up/dn lt. blue - white at drivers door switch
RF Window up/dn brn/wht - brn/wht at drivers door switch
LR Window up/dn blu/wht - RED / blk at drivers door switch
RR Window up/dn gry/blk - grn/wht at drivers door switch
-------------
Posted By: master5
Date Posted: March 10, 2007 at 8:48 PM
In the second picture..the lt.blue and the white..plainly there for LF window.....now find those and the rest at the switch harness...good luck.
-------------
Posted By: durangor ice
Date Posted: March 11, 2007 at 4:25 AM
so basically i cut the lt. blue and make the connection there, correct? And also is there a way to check it without connecting it to the alarm itself..such as a 12v source? AND also i have a Prestige 996-A alarm/remote start system..which wire would be the auxiliary output if anyone knows?
Sorry one more thing too. Which wires would i connect it to to use my OPTION button on my twoway on that alarm? Thanks for the info guys!
-------------
99' Dodge Durango
Posted By: durangor ice
Date Posted: March 11, 2007 at 2:47 PM
Well ill be doing the wiring up now..ill take pics and post up a how-to i suppose.
-------------
99' Dodge Durango
Posted By: durangor ice
Date Posted: March 11, 2007 at 4:19 PM
ok so i have EVERYTHING wired up to the switch panel and the window still go up and down so i guess im good there. I have power to the module and now i just need to know which wire is the AUX output for my alarm. Its a Prestige 996-A. So if anyone could help me ASAP that would be great. I was lookin through the manual but i dont understand all that mumbo jump outputs and inputs and which one to use. Also i wanted to be able to use my OPTION key on my transponder to be able to put the windows DOWN. I know that the wires arent used yet cause i dont have a truck release hooked up. Thanks alot guys.
-------------
99' Dodge Durango
Posted By: durangor ice
Date Posted: March 11, 2007 at 4:23 PM
o and i wanted the aux output or whatever so that when i ARM my truck that my windows go UP. and then when i hold the OPTION key on the twoway that the 2 windows go down. And yes i did buy a 4 window up/ 2 up/dn module. Sorry if im confusing at all.
-------------
99' Dodge Durango
Posted By: durangor ice
Date Posted: March 11, 2007 at 5:24 PM
Haha nvm guys. I got the damn thing to work :P I realized that i need another module for the 2 window up/down but this works out great anyways..BUT i would still like to know which wire i have to wire it to so that once i ARM my alarm that the windows will go up. For now tho i have it wired to channel 3 for the option key on the twoway. And works PERFECT! Thanks for all the help!
-------------
99' Dodge Durango
|