2002 acura mdx 556h problem, also trigger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91519
Printed Date: May 17, 2024 at 8:47 PM
Topic: 2002 acura mdx 556h problem, also trigger
Posted By: legenux
Subject: 2002 acura mdx 556h problem, also trigger
Date Posted: March 10, 2007 at 7:24 PM
I'm trying to do my brother's car but we ran into a few problems. I tried following mode 1 on 556H but its does work. Can someone tell me if I should use mode 1 or 2? The manual came with 556H says to use mode 2, but couldn't find the wires they listed. Wires were available for mode 1. Also, does anyone know where the door trigger is located? I tried looking but could find. Thanks.
Replies:
Posted By: Velocity Motors
Date Posted: March 10, 2007 at 8:13 PM
BLACK/ white (-) at the interior light switch. When using the 556HW, follow the mode 2 wiring diagram. The reference wire is BROWN / black, data 1 wire is red, data 2 wire is blue and ignition wire is yellow/black.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: legenux
Date Posted: March 10, 2007 at 8:42 PM
Hello, I have the info for the interior light switch. But I couldn't figure out what or where is that located. Is that near the DKP ?
Posted By: Velocity Motors
Date Posted: March 11, 2007 at 10:16 AM
The interior light switch is any light that responds to the door opening and closing. The overhead light, door light or cargo lights.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: legenux
Date Posted: March 11, 2007 at 11:01 AM
Thank you very much. I have found that wire. =)
Posted By: legenux
Date Posted: March 11, 2007 at 11:02 AM
Also, 556H works now. Thanks for wire reference ^_^
|