Marksman problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9154
Printed Date: September 06, 2025 at 5:34 AM

Topic: Marksman problems

Posted By: brianh
Subject: Marksman problems
Date Posted: February 06, 2003 at 6:30 PM

The Marksman alarm I installed on a 1999 Ford Explorer is telling me that the shock sensor set it off. The only problem is that there is no shock sensor on the vehicle. Anyone run into this before? Thanks in advance. Brian

Replies:

Posted By: securinu
Date Posted: February 06, 2003 at 8:13 PM

brian the shock is built in on these go to program step 5 i think and adjust it down . check the install manual i turned mine way down. also if you mount the brain vertical it makes it less sensitive.

Posted By: brianh
Date Posted: February 07, 2003 at 5:27 AM

Thanks for opening my eyes. I kept reading about the optional zone 4 sensor.(it comes with a harness to hook it to the cpu) There for I saw optinal and thought that there was not one. This is my first Marksman and I thank you you for helping out. Brian

Print Page | Close Window