99 jeep window module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91548
Printed Date: May 22, 2024 at 8:10 PM
Topic: 99 jeep window module
Posted By: harrisell1
Subject: 99 jeep window module
Date Posted: March 11, 2007 at 12:34 PM
I have autopage 860 and connecting two window modules ac-78 (4 windows up and down). Everything works fine except the ground when armed wire becomes active when the ignition is turned off which roles up the window when I want them to roll up when the alarm arms. Not sure what's going on. (99 jeep chrokee)
-------------
electronics
Replies:
Posted By: KarTuneMan
Date Posted: March 11, 2007 at 2:38 PM
Are you sure you have the ground when armed....it doesn't sound like it. That trigger should only work when you manually arm. Is the unit programmed for "passive" arm, or lock?
-------------
Posted By: harrisell1
Date Posted: March 11, 2007 at 7:19 PM
yes, it programmed for passive locking and I connected to the orange wire on the 860. Maybe I will try the ORANGE / white see if those two wires were put in the harness in reverse at Autopage company.
-------------
electronics
Posted By: harrisell1
Date Posted: March 23, 2007 at 11:41 PM
I figured it out, I diode isolated the ground when armed. The ignition was feeding back into the relay giving the modules a signal. Everythings fine, starter disabe, windows, and hyper blue light, all activate when alarm arms. Thanks
-------------
electronics
|