how to install door lock switch?
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9167
Printed Date: June 13, 2024 at 2:28 AM
Topic: how to install door lock switch?
Posted By: nmssr08
Subject: how to install door lock switch?
Date Posted: February 07, 2003 at 2:43 AM
Hi, I have an 1999 Toyota Tacoma and I recently installed a Alpine alarm system. I did not have any keyless entry so I got that installed too. Well, I was wondering if I can install an power door lock switch into my existing door lock actuators. I don't have any switch yet so can anyone tell me how to install and where is the good place to purchase a door lock switch?
Replies:
Posted By: BNLUIS
Date Posted: February 07, 2003 at 9:41 AM
This swith kit will wire to your door lock relays, this switch is made by SPAL. Just foll ow this link https://www.spal-usa.com/html/fpowdoo3.htm, but remember there are companies out there this just an example. 
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.