bmw 323 window rollup/total closure

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91750
Printed Date: May 04, 2025 at 3:34 PM

Topic: bmw 323 window rollup/total closure

Posted By: spaspecker
Subject: bmw 323 window rollup/total closure
Date Posted: March 15, 2007 at 4:36 PM

Hi Guys - I'm trying to add the factory fit window rollup (total closure) feature to my alarm (If I lock the car with my key and keep it held to 11 o'clock the windows will rollup if they're open)

I've already got the "double lock" feature wired in so I just need to know if it's a case of extending the lock pulse to about 15 seconds - I have a 528t but I can't seem to get it to put out a positive signal that I could wire to the lock pulse (I've tried cutting the blue loop)

Any ideas???

Replies:

Posted By: howie ll
Date Posted: March 22, 2007 at 2:14 PM

Yes if you've gone to the lock unlock wires in quad plug at module behind glove box, should be blue/red and white black neg, extend lock pulse, doesn't need double lock unlock in Europe.

Print Page | Close Window