astroflex 2100 two ch programming

Go to car one with  BOTH remotes. (remember wich remote is wich) flip up dip #8, push the brake. Hit lock ONCE on this cars remote, then hit lock twice, and hold...on the second cars remote (double clutch as you called it.) Flip down dip #8, push the brake. Car one is done, it should now start with remote one/car one, single push. It should also satrt with #2 car remote with the doulble push and hold. When programming the remote for car one (car ones remotes only) I would suggest douing BOTH of the remotes for car 1, then the remote for car 2.

Do the same thing for car #2, get BOTH of car #2's remotes, and 1 remote from car #1. Flip up dip#8, hit the brake. push lock on BOTH remotes from car #2, then do the double clutch form the remoe from car one!!! flip the dip down, hit the brake.....done Both of the remotes from each car should work on that respective car, and only one of the remotes will start the OTHER car....so remember wich remote to carry if you wish to start BOTH cars.

Car 2 , 99 Camry XL v6 works just fine and always has.  One push opens all doors.

Car1 is a 2004 Camry xle v6 and when the 2100 was initially installed, it was set up to require two presses to unlock all doors.  We now find that we would want it to work like car2 if its not much of a hassle.  One push to unlock all doors. 

Thank

Albie