Print Page | Close Window

autopage rs 900lcd manual

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91891
Printed Date: April 29, 2024 at 3:42 AM


Topic: autopage rs 900lcd manual

Posted By: accessdenied
Subject: autopage rs 900lcd manual
Date Posted: March 20, 2007 at 9:37 AM

Anyone have a pdf or scanned version of the autopage 900lcd manuals?
Thanks.



Replies:

Posted By: profuse007
Date Posted: March 20, 2007 at 10:40 AM
check the General Info> download for similar model wiring.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).




Posted By: accessdenied
Date Posted: March 20, 2007 at 11:29 AM
Thanks for the reply and advice but went there already and no dice on the rs-900lcd.




Posted By: profuse007
Date Posted: March 20, 2007 at 7:54 PM
no, what i am sayin is that 700-model and 800-model wiring should be the same as the 900lcd.

so check in there again. i believe i upload a copy

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).




Posted By: wicked6905
Date Posted: March 30, 2007 at 8:16 PM

hello i have the installation manual.....send me yuor e-mail





Posted By: accessdenied
Date Posted: March 30, 2007 at 9:21 PM
wicked6905 wrote:

hello i have the installation manual.....send me yuor e-mail





pm'd you... thanks!!!




Posted By: muhnihausen
Date Posted: April 14, 2007 at 9:54 PM

Anyone happen to have the installation manual for the RS-420LCD? I just bought a "new" car with one installed, but it isn't working. By the look of the rat's nest of an install, I'm sure it is wiring related.

Thanks,

Justin





Posted By: muhnihausen
Date Posted: April 14, 2007 at 9:56 PM

Opps, I meant RF-420LCD!

Thanks!





Posted By: metaverse
Date Posted: April 14, 2007 at 9:56 PM





Print Page | Close Window