dei gm 457g databus stopped working?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91998
Printed Date: May 10, 2025 at 11:26 PM

Topic: dei gm 457g databus stopped working?

Posted By: sick ca yukon
Subject: dei gm 457g databus stopped working?
Date Posted: March 22, 2007 at 1:22 PM

I brought my truck to the dealership for a service and now my doors DO NOT lock with the alarm remote. I have done some research and it seems the DEI DATABUS may need to be reprogrammed? What would have caused this?? I don't want to ever have this issue again, I thought the doors were locked and they weren't...The alarm still responds when the door is opened tho....someone could of opened the door and stole a few things before i would of gotten to the vehicle..... Thanks for any help or advice!!!!!!!!

Replies:

Posted By: Twelvoltz
Date Posted: March 22, 2007 at 1:32 PM

Programming the 457G is fairly simple. Check out the owner's manual here.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: sick ca yukon
Date Posted: March 22, 2007 at 1:59 PM

Thanks for that information.....After further research i think i may have the 1700g data bus.....is there any manual online for install/programming? Thanks again for any help or advice!!

Posted By: Twelvoltz
Date Posted: March 22, 2007 at 2:14 PM

The 1700G manual can be found here. The 1700G does not normally need to be reprogrammed, it just requires the vehicle to be started with the key prior to it operating.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: sick ca yukon
Date Posted: March 22, 2007 at 2:36 PM

Nice, thanks for that. What would be a typical cause for the door locks to stop responding to the remote? I dont want this to ever happen again....Thank you! This all happened today....I just had my truck at the dealership last night for a major service....and today its not working right...

Posted By: peterubers
Date Posted: March 23, 2007 at 11:28 AM

Does that 1700G need constant power for it's memory module? If that's the case, perhaps the dealership disconnected the battery for whatever reason during their diagnostics/repair ...

-------------
The search function is your friend.