2004 hummer h2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91999
Printed Date: May 11, 2025 at 6:05 PM
Topic: 2004 hummer h2
Posted By: mlaurenza
Subject: 2004 hummer h2
Date Posted: March 22, 2007 at 1:54 PM
Customer states that the aftermarket remotes quit working after he uses the factory remote. The system is a Autopage RS600 with a DEI 457G. Is it possible that the BCM is going to sleep after a while?
Replies:
Posted By: Velocity Motors
Date Posted: March 22, 2007 at 9:43 PM
Have you had the vehicle in for diagnostics ? Seems weird but try to reprogram the remote controls and see if the problem persists. May also have a dead battery and customer didn't realize this. 9 out of 10 times it's a customer error.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Zeplin1073
Date Posted: March 23, 2007 at 3:37 PM
I have done that same set up in that truck. the 457gw is hooked up through the data wire and controls everything, so if the bcm did fall asleep it would wake up with the remotes. but why is the customer still using the factory remotes?
Posted By: mlaurenza
Date Posted: March 23, 2007 at 6:31 PM
The new RS600 only comes with one remote that does keyless. The other remote only starts the car. I dont know why Autopage decided to save .50 cents buy only giving out one remote with keyless but thats the way it is.
|