07 ram 3500 can sl2 i

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92005
Printed Date: May 20, 2024 at 10:11 AM

Topic: 07 ram 3500 can sl2 i

Posted By: mustang347
Subject: 07 ram 3500 can sl2 i
Date Posted: March 22, 2007 at 4:52 PM

Installed a Autopage 860 remote start alarm in a 97 Ram 3500 along witha CAN-SL2-i and an ignition bypass and now when you turn the ignition off, the flashers flash 4 times. Everything works properly and if I unplug the CAN module the flashers do not flash. Any idea what could be causing this?

Replies:

Posted By: Velocity Motors
Date Posted: March 22, 2007 at 9:34 PM

Have you tried removing the fuse on the Autopage and trying the same thing ? The CANSL2 doesn't control the parking lights where as the Autopage does. Chances are it's your Autopage unit is doing it, but post your results.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mustang347
Date Posted: March 23, 2007 at 8:37 AM

If I unplug the parking light output from the alarm itself the flashers still flash when you turn off the ignition. If I take the Can module out of play, the flashers do not flash with you remove the key.

Print Page | Close Window