bulldog starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92007
Printed Date: May 15, 2025 at 1:36 AM

Topic: bulldog starter

Posted By: tscu
Subject: bulldog starter
Date Posted: March 22, 2007 at 6:55 PM

I was in the process of installing a model 500 deluxe starter on a friends 99 Gmc Jimmy when I found out bulldog has gone out of buisness. I was having problems with the 791 security bypass and called tech support, they said the voltage on the vehicle was to high and sent me a 781 bypass. The problem is the web site and instructions do not tell where to connect the white wire from the bypass to the 500 deluxe, The instructions are for the rs1100 and other models. Can anyone tell me where this wire goes?

Thanks

Tim

Replies:

Posted By: Velocity Motors
Date Posted: March 22, 2007 at 9:48 PM

On the H7 harness Pin # 1 ( BLUE/BLACK ) wire you have to hook up to the WHITE wire on the 791

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: tscu
Date Posted: March 23, 2007 at 3:34 PM

The bypass I have is a 781 and not a 791. I tried the 791 and it keept loosing the code, Bulldog said the vehicle voltage was to high and sent a 781. Is the connection for the white wire the same on both the 781 and 791? Thanks for the reply.

Posted By: Velocity Motors
Date Posted: March 23, 2007 at 8:03 PM

Yes connection is the same for both module concerning the WHITE wire.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: tscu
Date Posted: March 25, 2007 at 7:11 PM

thanks for the help.