Print Page | Close Window

on chdl7 pk2 going into a 300c

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92055
Printed Date: July 07, 2025 at 4:55 PM


Topic: on chdl7 pk2 going into a 300c

Posted By: smwalker
Subject: on chdl7 pk2 going into a 300c
Date Posted: March 24, 2007 at 4:00 AM

I am planning on doing another Keypad install but this  time in a 2006 Chrystler 300.  I go the CHDL7-PK2 and it wants me to use the 2 keys to program it.  Besides only having one of the keys (used car) all I really need for the module to do is unlock the doors when getting signal from the keypad.  Do I have to go through the key programming for that?  Am I right in guessing that all that key programming stuff has to do with remote starting systems that I am not installing?

Thanks for any input

Steve W.

Los Angeles, CA




Replies:

Posted By: Twelvoltz
Date Posted: March 24, 2007 at 1:54 PM
Yes, the door locking interface will work fine without programming the key. As you stated, it is only used if you are installing a remote start.

-------------
Installer, IT support, and FFL. I need less hobbies.



Posted By: smwalker
Date Posted: March 24, 2007 at 2:39 PM
Good to know, Thanks!


Print Page | Close Window