Print Page | Close Window

2002 ford escape dome supervision

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92066
Printed Date: July 12, 2025 at 4:14 AM


Topic: 2002 ford escape dome supervision

Posted By: goofy_69er
Subject: 2002 ford escape dome supervision
Date Posted: March 24, 2007 at 12:44 PM

Hey can someone help me where and what is the wire that plug 86 goes to i can not find it in any of the wiring diagrams posted. Here is the picture i am looking at please tell me if i am looking at the right thing. Thanks for any help

posted_image




Replies:

Posted By: Twelvoltz
Date Posted: March 24, 2007 at 1:40 PM
That diagram is correct for your 02 Escape. Pin 86 is the negative dome supervision output from your aftermarket system. DEI lists this info for wire color and location:

Dome Supervision      lt GREEN/ black              drivers door harness




-------------
Installer, IT support, and FFL. I need less hobbies.



Posted By: goofy_69er
Date Posted: March 24, 2007 at 1:43 PM

Twelvoltz wrote:
That diagram is correct for your 02 Escape. DEI lists this info for wire color and location:

Dome Supervision      lt GREEN/ black             drivers door harness

Yes i found the GREEN/ black wire but where is the wire that the white wire on the relay goes to. 




Posted By: Twelvoltz
Date Posted: March 24, 2007 at 1:50 PM
Well, since you did not post the make and model of your alarm/starter I have no idea. Which is why I posted "Pin 86 is the negative dome supervision output from your aftermarket system".

-------------
Installer, IT support, and FFL. I need less hobbies.



Posted By: goofy_69er
Date Posted: March 24, 2007 at 2:22 PM

Twelvoltz wrote:
Well, since you did not post the make and model of your alarm/starter I have no idea. Which is why I posted "Pin 86 is the negative dome supervision output from your aftermarket system".

Ok i understand now thanks a bunch for your help


Print Page | Close Window