ps 2704 remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92099
Printed Date: August 22, 2025 at 3:36 AM
Topic: ps 2704 remote start
Posted By: tvcomputerwiz
Subject: ps 2704 remote start
Date Posted: March 25, 2007 at 8:01 AM
i need an installation manual for a remote start keyless entry kit i got at a garage sale 9 months ago. here are the specs. please help me. ps the owners guide would help too. here is a picture 
Replies:
Posted By: roadworks
Date Posted: March 25, 2007 at 1:02 PM
Your remote start is a Polar Start. this unit is made by AutoStart. It should have the same basic colours as any Autostart remote starters. Check www.autostart.ca
Posted By: tvcomputerwiz
Date Posted: March 25, 2007 at 5:57 PM
yeah that didnt help but thanks anyway. anyone else?
Posted By: roadworks
Date Posted: March 25, 2007 at 10:47 PM
can you take a pic of the harnesses and I can tell you what the colours are
Posted By: tvcomputerwiz
Date Posted: March 26, 2007 at 3:17 PM
Posted By: tvcomputerwiz
Date Posted: March 26, 2007 at 3:18 PM
here it is. some idiot-i think twisted the wires. i untwisted them but some still look twisted. THANKS!!!!
Posted By: tvcomputerwiz
Date Posted: March 26, 2007 at 3:20 PM
ps #4 is blank-anyone know why?
Posted By: tvcomputerwiz
Date Posted: April 04, 2007 at 7:56 PM
Im gonna sound stupid cause ive been installing these in all 4 of my vehicles so far but what is an external trigger wire (-) which according to the manual means power (12vt) is being pumped away from the control unit? THANK!!!!! Tim ps is voltage supplied constant through this wire or just for a second.
Posted By: tvcomputerwiz
Date Posted: April 04, 2007 at 8:28 PM
someone please confirm what i believe this does. i believe this wire produces a (and the manual says) - means positive from the home control unit to the function-(what is it?) thanks tim ps can i make this wire control anything i want if i dont need it? (i dont think i do)
Posted By: mikvot
Date Posted: April 04, 2007 at 8:45 PM
If you are talking about a remote start, generally the external trigger wire will allow the remote start to be activated with a quick negative pulse to this wire..
-------------
Posted By: tvcomputerwiz
Date Posted: April 05, 2007 at 3:49 PM
roadworks? thanks for the manual but heres just 1 more question... do i have to program the remote to the base unit (reciever)? it was removed already from a car but over a year ago. THANKS!!!
Posted By: roadworks
Date Posted: April 05, 2007 at 5:58 PM
you shouldn't have to if it was already program to that module.. but you may have to reprogram the unit for the tach signal
Posted By: roadworks
Date Posted: April 05, 2007 at 6:01 PM
also the negative trigger wire can be used to trigger the unit to remote start from as like an aftermarket alarm or an external trigger unit.
Posted By: tvcomputerwiz
Date Posted: April 05, 2007 at 9:43 PM
ok thanks again!!!!!
|
