mitsubishi door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92201
Printed Date: April 27, 2024 at 3:15 PM
Topic: mitsubishi door locks
Posted By: adavila
Subject: mitsubishi door locks
Date Posted: March 27, 2007 at 5:19 PM
hey guys.. can you please tell me if im in the right directions this is the way my relay is set up for a 2003 mit. galant.. 86 - 12volt 87 - 12volt 87a - motor 30 - switch 85 - to alarm... is this right???
Replies:
Posted By: joe_1
Date Posted: March 27, 2007 at 5:26 PM
sorry what are you trying to do here?? pulse the wire with a + polarity, or reverse it, as you have wired pin a7a on the relay??
-------------
i am also a technician so if you have any engine trouble let me know, and i will do my best to help.
Posted By: adavila
Date Posted: March 27, 2007 at 5:44 PM
well the thing is... i have no idea how to set up the door locks for unlock and lock... can you pls help??
Posted By: mikvot
Date Posted: March 27, 2007 at 5:47 PM
Are the doorlock outputs of the alarm (-)....If so, then these can go straight to the lock and unlock wires of the vehicle. Lock...violet(-) at drivers kick or etacs. Unlock(-) lt/green red at same.
-------------
Posted By: KarTuneMan
Date Posted: March 27, 2007 at 5:51 PM
The door locks are negative trigger | LOCK | Purple | In harness from driver's door | - | | UNLOCK | GREEN/ red | In harness from driver's door | - |
No need for pin 87a, 87 to ground, 86 to 12volts fused, 85 neg.trigger from alarm, 30 to the lock/unlock wire. You need 2 relays wired this way, one for each, lock, and unlock. -------------
Posted By: adavila
Date Posted: March 27, 2007 at 6:45 PM
so let me get this right.. i dont need any relays??? i just put through the wires from the alarm straight to my locks??
Posted By: mikvot
Date Posted: March 27, 2007 at 6:53 PM
Most systems are capable of doing negative door locks without relays.....if you want to be safe, then use the info KarTuneMan gave you. 2 relays 86...12v 87....ground 85 lock or unlock from alarm. 30 lock or unlock of vehicle. 87a not used -------------
Posted By: adavila
Date Posted: March 27, 2007 at 6:55 PM
thanks man.. ill use this... thanks alot..
|