Hi
Just bought a keyless entry kit from eBay to install in my Mitsubishi Colt/Mirage 1993.
Discription:
BW-852- a full featured keyless entry with 4 button remotes, built-in relays, and a universal 2 door lock kit.
2 - four (4) button, icon style remote transmitters
Plug in LED - Make thieves think you have an alarm!
Plug-in multi-function, valet / override switch
Remote Panic mode
Horn / siren output
Ignition controlled door lock option - programmable
Programmable door lock pulse time
On-board relay for + park light flash
Output for domelight supervision / illuminated entry
Remote door locking / unlocking with on-board relays
Passenger unlock output
< color=#0000ff >Keyless entry - even in valet mode
< color=blue >Starter disable output
< color=blue >Auxillary output < color=blue > for trunk / hatch release, windows or ??
< color=#0000ff >Code learning receiver
< color=blue >Owners manual & Installation manual
Don't have so mch experience in this field, just some small car stero installations.
I got instructions to mount the lock motors, so I don't think that will be a problem. But I need help to do the wireing.
1. Where should I place the black box (relay?) and where do I plug in all the wires coming from this?
2. There are 2 wires (short ones) from the door motor, where does theese go?
3. How do I program the diffrent functions?
4. There is a small black wire coming from the black box (away from the others), what is this for?
I managed to get a wirering diagram but I need some help to use this and locate the place where the wires go (and which).
Hope you understood some of my questions, at least. ;)
I will be extremly happy for any help
Andre
Norway