Print Page | Close Window

clifford matrix 50.5x sst

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92238
Printed Date: May 20, 2024 at 5:05 AM


Topic: clifford matrix 50.5x sst

Posted By: martiale
Subject: clifford matrix 50.5x sst
Date Posted: March 28, 2007 at 9:36 PM

This 2way pager and remote start alarm with SST has various sensor inputs for: door, trunk, hood, shock sensor. It has one LCD remote control with a lot of icons, the question is: is there a way to know how many and whic ones are triggered? when more than one sensor activates at the same time interval. The LCD remote shows for example shock sensor has been activated but at the same time the door sensor activated as well and I don't see this on the LCD remote, am I missing something here. Is there a way to know from the remote which sensors have been activated when more than one sensor trigger at the same time?



-------------
'99 BMW E36 M3 Coupe



Replies:

Posted By: kgerry
Date Posted: March 29, 2007 at 4:19 PM

if the hood is triggered it will flash the hood icon, if the door is then opened it will flash the door icon,  shock, shock etc etc

if shock is triggered first it will flash shock , it will then flash doors if the doors are opened...



-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979


Print Page | Close Window