5 wire locks on 95 z71

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92255
Printed Date: July 05, 2025 at 4:56 PM

Topic: 5 wire locks on 95 z71

Posted By: usmarine1
Subject: 5 wire locks on 95 z71
Date Posted: March 29, 2007 at 11:55 AM

Ok, I'm really confused here. I have a 95 Z71 with PDL and no keyless entry(that I know of) I used the tan and gray wires in the driver door boot and the relay diagram for 5-wire locks. Problem is...I hit the lock button or unlock button and only the driver door locks or unlocks. What am I doing wrong? Please help I have to have this truck done tonight. Thanks in advance

Replies:

Posted By: rudydapimp
Date Posted: March 29, 2007 at 1:20 PM

Use the Light blue (lock) and White (unlock) in drivers kick. Still 5-wire. You tagged the lock and unlock motor for the drivers door.

Posted By: usmarine1
Date Posted: March 29, 2007 at 1:48 PM

What about the white and light blue ones in the driver door rubber boot? It's a huge PITA to get to the ones under the kick panel because the parking brake is in the way and I don't feel like removing it just to get to two wires.

Posted By: rudydapimp
Date Posted: March 29, 2007 at 2:38 PM

those are the same. just make sure that you test with DMM.

Posted By: usmarine1
Date Posted: March 29, 2007 at 2:51 PM

I just pulled it into the bay. Wish me luck. I found the ones that get a 12V pulse when the lock/unlock button is pressed

Print Page | Close Window