Print Page | Close Window

trunk latch modification, 1939 plymouth

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92257
Printed Date: November 03, 2025 at 11:52 PM


Topic: trunk latch modification, 1939 plymouth

Posted By: autoapp
Subject: trunk latch modification, 1939 plymouth
Date Posted: March 29, 2007 at 1:38 PM

I took the trunk latch and closing assembly out of a mid 90's Cadillac.
I'm installing it in a 1939 Plymouth Businessman's coupe. The latch and closing assembly have limit switches on both of them. The latch has a limit switch that reports when the mechanism is latched, and the motor assembly has a switch that reports when the trunk is fully closed. My question is how I'm going to wire these switches together to make the whole thing work. Any help would be much appreciated.



Replies:

Posted By: autoapp
Date Posted: March 29, 2007 at 2:10 PM
sorry, motor has its own switch on the assembly that cuts movement on its own. it just requires a ground signal to function.




Print Page | Close Window