96 dodge ram key on wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92345
Printed Date: May 12, 2025 at 9:41 PM

Topic: 96 dodge ram key on wire

Posted By: blindguy
Subject: 96 dodge ram key on wire
Date Posted: March 31, 2007 at 6:08 PM

i cannot find any wires that are only positive when the keys are on run, and not while the engine is running from remote start.

Replies:

Posted By: Twelvoltz
Date Posted: March 31, 2007 at 6:27 PM

HUH?

Are you saying that the remote start energizes all of the wires (minus the starter wire) in the ignition harness during remote start? This is how the key works when it is turned to the run position and is correct. Most vehicles do not require all of the accessory wires for RS but some installers energize them all to be safe.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: blindguy
Date Posted: April 01, 2007 at 1:35 AM

i have all of them energized. the unit cannot tell when to stop energizing the modual with out knowing when i put my key into the run poss.

are you saying that i could disconect the acc from the starter modual and use that the tell when the key is on?

Posted By: blindguy
Date Posted: April 01, 2007 at 2:06 PM

blindguy wrote:

are you saying that i could disconect the acc from the starter modual and use that the tell when the key is on?

that worked! also solve my problem with the radio turning on before i want it to

Print Page | Close Window