Print Page | Close Window

96 lexus door wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9236
Printed Date: September 12, 2025 at 1:15 AM


Topic: 96 lexus door wiring

Posted By: shel-tek
Subject: 96 lexus door wiring
Date Posted: February 08, 2003 at 4:49 PM

last week i posted a ? concerning the location of door lock wiring for 96 lexus ls400. i found a g/red and g/black in pass. door but these wires only lock and unlock all doors except for the driver's. any suggestions please help confused installers.



Replies:

Posted By: Velocity Motors
Date Posted: February 09, 2003 at 8:10 AM
You may have to go straight to the driver's door switch and access the wires there.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: Chris Luongo
Date Posted: February 09, 2003 at 8:29 AM

Hmm.  I just looked in DEI's techsoft, and they say to use the same colors as you have----at the door ECU in the passenger's door.  Also, if it's like most other Toyotas, you're looking for the wires that test by turning the key in the door----you shouldn't use the wires that test off the switch, because under certain conditions, the unlock function of the switch can become disabled.

Make sure the wires you have do indeed test off the key, and also try triggering them with all doors closed, in case that is necessary.






Print Page | Close Window