Print Page | Close Window

cab lights not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92408
Printed Date: June 06, 2024 at 5:13 PM

Topic: cab lights not working

Posted By: mordicus7
Subject: cab lights not working
Date Posted: April 01, 2007 at 11:15 PM

Installed a compustar 2 way on a 2000 Chevy Silverado everything works fine except for none of the cab lights are working, Instead what happens is when I try to turn on the map lights or open the drivers door while the truck is running the message center in the dash says Cargo Lamp On even if I open the glove box this happens. If any of the interior lights come on this happens, I checked the dome overide and that is not the problem just wondering if someone could help trouble shoot this

Thanks!!

Replies:

Posted By: peterubers
Date Posted: April 02, 2007 at 12:58 AM

did you diode isolate your door triggers?

-------------
The search function is your friend.

Posted By: mordicus7
Date Posted: April 02, 2007 at 4:34 PM

i know the first time it was done it wasnt isolated

Print Page | Close Window