scanner or equivelant

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92463
Printed Date: July 16, 2025 at 9:08 AM

Topic: scanner or equivelant

Posted By: jmelton86
Subject: scanner or equivelant
Date Posted: April 02, 2007 at 8:58 PM

I have the cheapest car-alarm out there. It's a Design-Tech First Defense. This thing gets the job done but it doesn't have a blinking red light or anything.

How can I add one that'll turn on when I arm my alarm?

If I have to use a switched one I will, but would rather have it turn on when I arm the alarm.

Thanx to all!

-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Replies:

Posted By: pitoaudiovisual
Date Posted: April 03, 2007 at 11:32 AM

you can buy the led lights and they come with three wires that when the ignition is off the lights go on or you can wire it to the starter cut off switch wire that then the alarm is armed and the negative goes to the cut off it will turn the light on..

-------------
Confidence is the key to any project!!

Posted By: jmelton86
Date Posted: April 03, 2007 at 6:57 PM

Oh, okay. These have good instructions included with them? Where can I get something like this?

-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Print Page | Close Window