Print Page | Close Window

how do i program a new viper remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92690
Printed Date: July 18, 2025 at 7:30 PM


Topic: how do i program a new viper remote

Posted By: whitecrystal1
Subject: how do i program a new viper remote
Date Posted: April 08, 2007 at 1:12 PM

I have a 550ES remote start alarm system in my truck. I have a new/used remote I am trying to program. Anyone have instructions on how I can do this.

I already tried turning the key to on

within 5 sec hitting the valet button one

and then hitting it again for channel 1 (I also tried it for channel 2 didn't make a difference)

pressing the lock button on the transmitter

then turning the key back off.

After doing this I get one button on the transmitter to work (the lock button). It will lock and unlock the doors and if I hold it, it will set off the alarm, but no start.

My system, the way it's set up with the remotes it came with, requires the lock/unlock buttons to be held in together to start it. Lock locks and unlock unlocks the doors. If I want to activate the alarm I hold the orange button.

Does anyone has the instructions I need? Thanks




Replies:

Posted By: whitecrystal1
Date Posted: April 08, 2007 at 1:42 PM
Nevermind, I got it posted_image



Posted By: 808bros
Date Posted: April 16, 2007 at 12:53 AM

Whats the Valet Button?

the star? or the AUX



-------------
HaWaIi BoRn


Print Page | Close Window