Print Page | Close Window

interfacing remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92762
Printed Date: July 13, 2025 at 11:21 PM


Topic: interfacing remote

Posted By: 4wslude
Subject: interfacing remote
Date Posted: April 09, 2007 at 8:30 PM

I have recently got a compustar 1 way alarm install and my car comes with factory keyless entry originally. How do I interface it so I don't have to carry 2 remotes all the time 



-------------
noob



Replies:

Posted By: KarTuneMan
Date Posted: April 09, 2007 at 8:42 PM
when your done you will NOT carry the O.E. remote!

-------------




Posted By: 4wslude
Date Posted: April 09, 2007 at 9:13 PM
Yo this doesn't help much

-------------
noob




Posted By: mikvot
Date Posted: April 09, 2007 at 9:19 PM
Your original post is weak, you need to list the year, make ,and model of the vehicle, and the exact model of the system going into the car...and exactly what you mean by "interface".....then we can help.

-------------




Posted By: 4wslude
Date Posted: April 09, 2007 at 11:03 PM

It's a 98 civic sedan and the model of the alarm system is cm3300 compustar 1way



-------------
noob




Posted By: enice
Date Posted: April 10, 2007 at 12:05 PM
When I checked on Directechs it did mention that the factory alarm can only be disabled via remote.  That may be the reason why they told you to keep both remotes together.




Posted By: peterubers
Date Posted: April 10, 2007 at 12:59 PM

hmm... the info i have doesn't mention anything -

12 VOLT CONSTANT  WHITE (+)   IGNITION SWITCH HARNESS   
 STARTER BLACK/ WHITE (+)  IGNITION SWITCH HARNESS   
 STARTER 2 N/A   
 IGNITION 1 BLACK / YELLOW (+) IGNITION SWITCH HARNESS  
 IGNITION 2 N/A    
 IGNITION 3 N/A     
 ACCESSORY /HEATER BLOWER 1 YELLOW (+)  IGNITION SWITCH HARNESS   
 ACCESSORY /HEATER BLOWER 2 WHITE/ BLACK (+)  IGNITION SWITCH HARNESS   
 KEYSENSE N/A     
 PARKING LIGHTS ( - ) N/A     
 PARKING LIGHTS ( + ) RED / BLACK (+)  IN DRIVERS KICK PANEL   
 POWER LOCK GREEN / WHITE (TYPE B)  @ BLUE PLUG IN DRIVERS KICK PANEL   
 POWER UNLOCK GREEN/ ORANGE (TYPE B)  @ BLUE PLUG IN DRIVERS KICK PANEL   
 LOCK MOTOR WIRE WHITE/ RED (+)  IN DRIVERS KICK PANEL, at DOOR HARNESS   
 DOOR TRIGGER LIGHT GREEN/ RED (-)  LOW IN DRIVERS KICK PANEL   
 DOMELIGHT SUPERVISION LIGHT GREEN/ BLACK (-), Requires Part #775 Relay  IN DRIVERS A PILLAR   
 TRUNK RELEASE N/A     
 SLIDING POWER DOOR N/A     
 HORN BLUE to GRAY  @ STEERING COLUMN HARNESS   
 TACH BLUE, See NOTE *1  @ TACH TEST CONNECTOR   
 WAIT TO START LIGHT N/A     
 BRAKE GREEN / WHITE (+)  @ SWITCH ABOVE BRAKE PEDAL   
 FACTORY ALARM DISARM  N/A     
 ANTI-THEFT N/A  



-------------
The search function is your friend.




Posted By: 4wslude
Date Posted: April 10, 2007 at 4:49 PM

Thanks peterubers.  I guess I needed to tap into POWiER LOCK AND UNLOCK When Armed and Disarmed the alarm system with my compustar remote



-------------
noob





Print Page | Close Window