viper 300esp, 01 monte carlo
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92809
Printed Date: April 30, 2024 at 1:43 AM
Topic: viper 300esp, 01 monte carlo
Posted By: snakeiz2
Subject: viper 300esp, 01 monte carlo
Date Posted: April 04, 2007 at 8:36 PM
i have a viper 300esp with remote start on a 01 monte carlo is it possible to just replace the brain for an updated dei alarm? wich model could i upgrade to? thanks
Replies:
Posted By: snakeiz2
Date Posted: April 11, 2007 at 9:28 AM
I have this alarm with remote start when i hade the remote start put in they said i would lose the opening the trunk option But i read that this alarm i has an expandable option and could use a 4button remote as well so how is it that i would lose trunk option? Alarm is in a 01 monte carlo thanks.
Posted By: mobilecustoms
Date Posted: April 11, 2007 at 10:19 AM
TRUNK RELEASE BLACK (-), Requires #775 Relay @ TRUNK RELEASE SWITCH
look at the 12 pin harness at the module there will be a RED / white wire in pin 12 and hook it to the black wire at the trunk release switch.
-------------
Posted By: snakeiz2
Date Posted: April 11, 2007 at 12:28 PM
I read that on tha viper book but then what would be the function on the remote to open it? i have the 2 button remote i press 1 for arm and un-arm and hold the secound one for 3sec. for starting. If i wire the alarm at the 12 pin for the trunk will it automaticly set for a remote 1and 2 at the same time for trunk? or do i have to take to be done with the bitwriter? thanks
Posted By: mobilecustoms
Date Posted: April 11, 2007 at 12:52 PM
it will be either button 2 held for 2 sec or 1 and 2 together
yiou can check this put with your multimeter if you have one. Test the wire and see what button(s) operate it. it should be button 2 held for 2 sec.
-------------
Posted By: Twelvoltz
Date Posted: April 11, 2007 at 1:11 PM
Here is your install manual. Yes your system offers 2 aux outputs and as already stated holding button II activates channel 2 and pressing I and II activates channel 3. ------------- Installer, IT support, and FFL. I need less hobbies.
Posted By: snakeiz2
Date Posted: April 11, 2007 at 2:43 PM
Im just woundering why my viper installer said i cant is not because of a the key fob of the car is it? I asume since my starter is on the secound button for 2sec. it must be channel 3? so al i need is a relay for the trunk and wirer it up to the trunk release. thanks
Posted By: mobilecustoms
Date Posted: April 11, 2007 at 5:07 PM
yup
-------------
Posted By: snakeiz2
Date Posted: April 11, 2007 at 7:32 PM
The viper hand book says i could upgrade to a 4 button remote, is it possible and if so what would be the the model number for it ? the two button is 471T or is there any other remote i could upgrade to thats compatiable? I searched for the 4 button but cant come up with the right model. Thanks
Posted By: mobilecustoms
Date Posted: April 11, 2007 at 7:54 PM
474t, 474v, 474p
eash one is eiother valet, viper, python- doesnt matter which one. they should program.
-------------
Posted By: mobilecustoms
Date Posted: April 11, 2007 at 7:56 PM
for the trunk release- you can wire it directly its a neg output and the wire in the car requires a neg pulse- put the channel 3 wire to the wire at the trunk rel switch. no need for a relay
-------------
|