Print Page | Close Window

06 impala remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92813
Printed Date: April 25, 2024 at 6:48 PM


Topic: 06 impala remote start

Posted By: voluster
Subject: 06 impala remote start
Date Posted: April 11, 2007 at 11:08 AM

Has anyone done one of these .

I have DEI's tech sheet and astroflex tech sheet and one says one thing and one says something totally different.

going by Dei  they are saying use a 556u and it's pretty staight forward car that starts once the ing lights up and the acc drops off.

but now Astro says it's like a colorado  or hummer h3 type wiring .

I'm gonna be doing this car on the side  guy has 2 of them . just haven't seen one of these in the shop yet.

This is gonna be on my time so I would like to make sure I have my info correct before I dive right in

Thanks for any input

Phil




Replies:

Posted By: Hymer
Date Posted: April 11, 2007 at 11:27 AM
XK 01 [door locks, don't really need it] ] and XK06 hybrid passkey bypass that way ya don't have to bury the key, other than that the car is pretty easy.

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair




Posted By: voluster
Date Posted: April 11, 2007 at 3:05 PM

I'm not worried about burying a key   they have 3 for each car

i'm just wondering whos tech sheet I should follow.

is it one of them cars that see ing and acc then drop off the cars knows to start or is it when i have to cut this measure the resistence against another wire type of deal.

I'm just trying to make sure I have what I need before I drive to the job get into it and find out I need something that I don't have access to on the weekend

Thanks





Posted By: Hymer
Date Posted: April 11, 2007 at 3:36 PM
I use Astros chart. If you have he diagram from them it explains it all. Whan the ign goes hot it breaks connection to the keysense/starter wire and use another relay programed to energize when the starter wire goes hot [from the remote starter] to send 1.3k to the reference wire. If you need the pinout just say the word...

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair




Posted By: voluster
Date Posted: April 12, 2007 at 8:23 AM

Sure if you could fire me that print out that would be great .

Voluster@comcast.net

thanks for your help






Print Page | Close Window