clifford intelliguard 6000 valet code

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92843
Printed Date: May 08, 2025 at 12:34 PM

Topic: clifford intelliguard 6000 valet code

Posted By: Namrock
Subject: clifford intelliguard 6000 valet code
Date Posted: April 11, 2007 at 10:03 PM

Hey i have a customer who has a clifford intelliguard 6000 who lost their remote. The problem is that he had also forgot his valet code. Is there away to bypass or reset his valet code to the standard valet code 2:**blank. I was considering disconnecting the alarm power supply hoping to reset the alarm but didn't want too take the chance of not being able to disarm the customers car. Any feed back would be great!

Replies:

Posted By: Big Dog
Date Posted: April 13, 2007 at 10:24 AM

Contact DEI USA about this. www.directed.com

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: extreme1
Date Posted: April 15, 2007 at 12:36 AM

the only way to do it is either remove the brain and send it to DEI, or use cliffnet wizard to reset the code.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta

Posted By: Namrock
Date Posted: April 15, 2007 at 4:10 AM

Thanks! i'll try and talk to directed. and also see if the clifford wizard will do the trick.

Print Page | Close Window