Print Page | Close Window

viper 650xv test to see if works?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92954
Printed Date: May 14, 2025 at 1:06 AM


Topic: viper 650xv test to see if works?

Posted By: signal63
Subject: viper 650xv test to see if works?
Date Posted: April 14, 2007 at 11:26 PM

a customer today didn't want his old alarm that was installed but we installed a new python alarm so everything worked fine...

i'm missing a few parts which i found on ebay for a good price...all it first needed was a valet switch, lock/unlock harness plug in, led light...

it needs an antenna harness/wire because it's cut but i still have the antenna..i also need a remote for it...

my question is...if i find a new remote...is there any way for me to program the remote and any way to test the alarm on the 'bench' to make sure it works?
on ebay, 1 of the descriptions said that if the original remote had a green LED indicator on it then it would work on the alarm..but since i dont have that..is there any way to know before i waste my money on a new remote?

will any DEI antenna/ antenna harness work?




Replies:

Posted By: jambostl
Date Posted: April 15, 2007 at 3:29 PM
you can program a remote to it as long as it is the same remote it would have come with. directed electronics website will give you the compatible remotes. but there is no way to really bench test an alarm system


Print Page | Close Window