07 ford escape keyless entry alarm add on

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92976
Printed Date: June 08, 2024 at 11:46 AM

Topic: 07 ford escape keyless entry alarm add on

Posted By: ddjd
Subject: 07 ford escape keyless entry alarm add on
Date Posted: April 15, 2007 at 5:57 PM

2007 ford escape w/ audiovox pursuit pro 9232a.

vehicle has oem keyless entry, i am adding an add-on alarm.

confused on door locks, i have 4 wires on alarm(pro 9232a).

GREEN/ black = arm input # 2, red = disarm input # 1, green = arm input # 1, RED / black trace = disarm input # 2.

where can i connect these wires?

please help

-------------
___ddjd___

Replies:

Posted By: mikvot
Date Posted: April 15, 2007 at 6:38 PM

The green arm wire goes to the pink/black (+) lock motor wire of the vehicle. In harness above kick panel coming in through door boot. Disarm 1 goes to RED / orange (+) unlock motor wire in same location as lock. The RED / black wire will go to the pass. and rear doors unlock motor wire which is pink / YELLOW (+) in drivers door sill. Harness tees under drivers seat. Not really neccesary to hook up the GREEN/ black, make sure you ground it out like the manual says though.

-------------

Posted By: ddjd
Date Posted: April 15, 2007 at 7:35 PM

great info thank you so much. except, RED / black connects to pink/orange? alarm now sets with oem keypad.

but for some reason the alam is triggered when the dome light turns off, and does not trigger when dome light is on.

i have the alarm purple wire connected to pink wire @ drivers kick panel.

please help again?

-------------
___ddjd___

Posted By: mikvot
Date Posted: April 15, 2007 at 7:43 PM

Use the brown wire on the alarm. The purple is meant for a positive trigger.

-------------

Posted By: ddjd
Date Posted: April 15, 2007 at 7:53 PM

it worked!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i love you man.

thanks a bunch. posted_image

-------------
___ddjd___

Print Page | Close Window