Print Page | Close Window

whistler remote start fob programming?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93026
Printed Date: September 09, 2025 at 8:55 AM


Topic: whistler remote start fob programming?

Posted By: starpath
Subject: whistler remote start fob programming?
Date Posted: April 16, 2007 at 7:45 PM

While rummaging through a box of absolute crap (mostly broken phone cables and curtain hardware), I scored what could be an extra fob for my remote starter at the MIT Flea yesterday. Internally and externally, it looks just like my original, except instead of Whister molded in the plastic, it says "on/off". No FCC ID printed extermally, but at $4 It was worth the shot.

this is what it looks like...

Any ideas on the sequence to get this working on my system? I bought my Pathfinder with the starter installed and no documentation. I only know it's a whistler because of a safety sticker in the engine bay identifying the presence of an auto starter. The Whistler website has no info on this.

Thx



Replies:

Posted By: starpath
Date Posted: April 16, 2007 at 7:48 PM
For what it's worth, it's a '96 Nissan Pathfinder LE 4x4.

Starter is an unknown Whistler model apparently from that same vintage.



Posted By: starpath
Date Posted: April 16, 2007 at 7:51 PM
Fixed URL for the pic:

https://i8.ebayimg.com/03/i/03/b0/99/1c_1_b.JPG


Print Page | Close Window