Print Page | Close Window

bypassing passlock 2 using relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93110
Printed Date: May 12, 2025 at 5:09 AM


Topic: bypassing passlock 2 using relay

Posted By: redpeppers
Subject: bypassing passlock 2 using relay
Date Posted: April 18, 2007 at 11:33 PM

anyone out there have any success using a relay(s) to bypass passlock 2 systems instead of using bypass modules?

-------------
Where theres is a wire there's a way.



Replies:

Posted By: Velocity Motors
Date Posted: April 19, 2007 at 8:05 AM
Done this in the past but costs me less to just buy one from one of the manufacturer's out on the market.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: tonyberg
Date Posted: April 19, 2007 at 9:44 AM

yup its easy....

85-12v

86-neg GWR output for your remote start unit

87- Resistor to ground matching the value you metered for passlock

87a- Keyside of RCode wire

30-BCM Side of RCode wire


Print Page | Close Window