bypass kits xk04 / xk05

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93121
Printed Date: May 14, 2024 at 3:19 AM

Topic: bypass kits xk04 / xk05

Posted By: Krazzyborri
Subject: bypass kits xk04 / xk05
Date Posted: April 19, 2007 at 11:04 AM

I'm currently preparing to install a remote start combo on a 2004 Mazda 3 and a 2006 Scion TC. Im looking to buy the kits from bypasskits.com. I want to get the XK04 and XK05.

Can I just use the kits right out the box, or do they have to be programmed first? By programmed I mean using the D2D datalink.

Thanks ! ! !

Replies:

Posted By: BNLUIS
Date Posted: April 19, 2007 at 11:31 AM

They will need to be flashed for the specific cars . If you don't have a cable and software, you can ask them to flash them for you.

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Posted By: tonyberg
Date Posted: April 19, 2007 at 11:40 AM

actually on the vehicles you listed both those modules come defaulted with the software you need so NO they will not need to be flashed.

Posted By: Krazzyborri
Date Posted: April 20, 2007 at 8:59 AM

Thanks Guys ! ! ! I just got a reponse from bypass kits and "tonyberg" was right. They are preloaded with data for that vehicle.

Print Page | Close Window