Alarm Reset Issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=932
Printed Date: July 21, 2025 at 11:21 PM

Topic: Alarm Reset Issue

Posted By: Upgrader
Subject: Alarm Reset Issue
Date Posted: May 24, 2002 at 5:00 PM

Hello,

I just recently installed a Clifford RS2 into a 98 Prelude. Everything seems to be working great. However, the alarm never gets reset. What I mean is that the alarm continues to beep 4 times when disarming and the LED always flashes an alarm trigger code (2 blinks) as if the alarm had gone off. It's like it never sees me starting the car. Is this a problem with the ignition wire? BTW, I did not hook up the remote start. Thanks in advance.

Replies:

Posted By: Chris Luongo
Date Posted: May 24, 2002 at 9:24 PM

Yes, that sounds exactly like the ignition wire on the alarm isn't seeing power. Check to see if you tapped the wrong wire, connection came loose, et cetera.

Print Page | Close Window