valet 562t, remote programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93251
Printed Date: June 09, 2024 at 12:56 AM
Topic: valet 562t, remote programming
Posted By: riddles7162
Subject: valet 562t, remote programming
Date Posted: April 23, 2007 at 11:25 AM
Hello I just bought a new remote for this and i cant find out how to program this can some one help me please??? thanks for any help
Replies:
Posted By: mobilecustoms
Date Posted: April 23, 2007 at 12:01 PM
turn on ignition press and release valet button, press and hold again then press button on remote. turn off ignition.
-------------
Posted By: Twelvoltz
Date Posted: April 23, 2007 at 1:11 PM
The install manual covers exactly what mobilecustoms has posted, and more. ------------- Installer, IT support, and FFL. I need less hobbies.
Posted By: riddles7162
Date Posted: April 23, 2007 at 5:28 PM
Hey thanks for the help work good on starting but i'm having trouble getting my doors to lock and unlock i have read the install guide just don't under stand where i program the locking controlls.. ant help thanks again
Posted By: Twelvoltz
Date Posted: April 23, 2007 at 5:30 PM
Door locking and unlocking are not really 'programmable' controls you can program to lock with ignition and unlock with ignition off, you can also program them for passive locking but other than that they are really not 'programmable'. If you programmed the remote as listed in the earlier post then the system would have learned the entire remote including lock and unlock. If the doors are not locking then either they were never hooked up or something is not working correctly.
-------------
Installer, IT support, and FFL. I need less hobbies.
|