2007 silverado xk06 pkg9

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93262
Printed Date: May 03, 2024 at 1:50 AM

Topic: 2007 silverado xk06 pkg9

Posted By: john ogrady
Subject: 2007 silverado xk06 pkg9
Date Posted: April 23, 2007 at 4:41 PM

I have a 2007 Silverado New body style in which I will be installing a remote start.The OEM anti-theft has 2 systems in it.PK3 the transponder and also Passlock Ion.The truck requires 2 modules to get the install done XK01-GMDL6 and XM06-PKG9.The XK01 is straight forward simple install.The Xk06 is a little confusing.I have figured out the 3 of 5 wires that come off the ignition switch.The last two are pink/black and white.Which one is r-code wire in which I have to cut to install the by-pass.Now with the last wire what is it used for and do I have any wires to connect to it from the main power harness.

Replies:

Posted By: jim hunter
Date Posted: April 23, 2007 at 4:54 PM

i believe the silverado is just like the tahoe, passlock not needed, just pkIII+ and like most other gms no starter wire, car sees access&ignition then acess. drop, tells bcm to crank car, only 1 bypass ( for pkIII+) is required
anyone correct me if im wrong, i dont see why it would be different than the tahoe

Posted By: Hymer
Date Posted: April 24, 2007 at 8:59 AM

Pink ign, Yellow acy, pink/black starter, white 5volt ref. Dont connect the accy out of your rs to the ign harness that is part of the R code. You cut the pink / black starter mux wire. you don't connect anything to the white wire. Im pretty sure this is correct , I was looking at an old xk06 sheet.

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair