Print Page | Close Window

1990 nissan skyline remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93270
Printed Date: May 14, 2024 at 1:28 PM


Topic: 1990 nissan skyline remote start

Posted By: surendrant
Subject: 1990 nissan skyline remote start
Date Posted: April 23, 2007 at 10:12 PM

I'm installing an EasyCar E502 2-Way Remote Start/Alarm and i'm having a lot of trouble finding the alternator wire. Its by first time installing an EasyCar unit and unlike Compustar or most remote start/alarms it uses an alternator wire input instead of a tach wire input. Without knowing i hooked it up to the tach wire and the engine just revved until i stopped the remote start from the remote. Can anyone tell me where this wire is in the skyline or any nissan (240sx) and how to test for it? Thanx.

-------------
Suren



Replies:

Posted By: JWorm
Date Posted: April 24, 2007 at 7:02 AM
Look for a skinny wire coming off the alternator that only shows 12v when the car is running.


Print Page | Close Window