Print Page | Close Window

viper 791xv domelight output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93287
Printed Date: May 13, 2025 at 12:02 PM


Topic: viper 791xv domelight output

Posted By: edwinve
Subject: viper 791xv domelight output
Date Posted: April 24, 2007 at 1:18 PM

hello how are you,

i just installed a  viper model 791 xv, and i only have one problem, my domelight supervision output does not work because i made a mistake connecting the domelight without a relay, my question is is there anyway to fix this or can i use a channel to turn on the domelight when i disarm my car. any ideas i really appreciate. thanks a lot




Replies:

Posted By: profuse007
Date Posted: April 24, 2007 at 3:48 PM
The dome light on the 791xv sends out a low current negative trigger.

If you put it on your vehicle that have positive domelight, the function might be fried. However, i did that once on my vehicle w/ teh same unit to a neg trigger domelight and it just dim but do not mess up the function.

I dont think or remember if there is another wire that function like that.

If you like I can trade you mine.

Email me at profuse007@yahoo.com

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).


Print Page | Close Window