| 
 03 suzuki grand vitara, wiringPrinted From: the12volt.comForum Name:  Car Security and Convenience
 Forum Discription:  Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
 URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93529
 Printed Date: October 31, 2025 at 6:53 AM
 
 
 Topic: 03 suzuki grand vitara, wiring
 
 Posted By: gkonitshek
 Subject: 03 suzuki grand vitara, wiring
 Date Posted: May 01, 2007 at 10:38 PM
 
 
 Anyone have a wiring diagram for the 03 Suzuki Grand Vitara for installing a Alarm/Remote Starter?
 
 Thanks
 
 
 Replies:
 
 Posted By: Twelvoltz
 Date Posted: May 02, 2007 at 7:45 AM
 
 DEI lists:
 
 DIRECTWIRE™ WIRING INFORMATION - SUZUKI / GRAND VITARA / 2003 / Remote Start
 
 [PRINT THIS PAGE]
 
 12volts      WHITE/ green (60A)       +       ignition harness
 Starter      BLACK/ red       +       ignition harness
 Second Starter      N/A
 Ignition      BLACK/ blue       +       ignition harness
 Second Ignition      N/A
 Third Ignition      N/A
 Accessory      yellow/black       +       ignition harness
 Second Accessory      blue       +       ignition harness
 Keysense      blue/red       +       ign harn or BCM, 16 pin plug, pin 13
 Notes: The BCM (Body Control Module) is below the radio.
 Power Lock      pink/black       -       BCM, 12 pin plug, pin 1
 Notes: The BCM (Body Control Module) is below the radio.
 Power Unlock      pink/green       -       BCM, 12 pin plug, pin 7
 Notes: The BCM (Body Control Module) is below the radio.
 Lock Motor      blue       5wi      BCM, 22 pin plug, pin 12
 Notes: The BCM (Body Control Module) is below the radio.
 Unlock Motor      blue/white       5wi      BCM, 22 pin plug, pin 2
 Notes: The BCM (Body Control Module) is below the radio.
 Parking Lights+      RED / yellow       +       BCM, 22 pin plug, pin 22
 Notes: The BCM (Body Control Module) is below the radio.
 Parking Lights-      RED / blue       -       BCM, 22 pin plug, pin 9
 Notes: The BCM (Body Control Module) is below the radio.
 Hazards      yellow/red       -       BCM, 22 pin plug, pin 17
 Notes: The BCM (Body Control Module) is below the radio.
 Turn Signal(L)      GREEN/ red       +       turn signal relay, left of column
 Turn Signal(R)      GREEN/  YELLOW       +       turn signal relay, left of column
 Reverse Light      red       +       driver kick, harness to rear
 Door Trigger      BLACK/ red       -       BCM, 16 pin plug, pin 16
 Notes: The BCM (Body Control Module) is below the radio.
 Dome Supervision      BLACK/ red       -       BCM, 22 pin plug, pin 14
 Notes: The BCM (Body Control Module) is below the radio.
 Trunk/Hatch Pin      common with door trigger wire
 Hood Pin      N/A
 Trunk/Hatch Release      N/A
 Power Sliding Door      N/A
 Factory Alarm Arm      pink       -       BCM, 12 pin plug, pin 2
 Notes: The BCM (Body Control Module) is below the radio.
 Factory Alarm Disarm      pink/blue       -       BCM, 12 pin plug, pin 8
 Notes: The BCM (Body Control Module) is below the radio.
 Disarm No Unlock      see factory alarm disarm
 Tachometer      brown       ac       cluster or ECM, 35 pin plug, pin 4
 Notes: The ECM (Engine Control Module) is behind the glovebox.
 
 Can also go to any ignition coil and use the wire that is NOT BLACK/ white or BLACK/ orange. Can also go to any fuel injector and use the wire that is NOT blue/black.
 Wait to start      N/A
 Brake Wire      GREEN / WHITE       +       brake pedal switch
 Parking Brake      RED / black       -       BCM, 16 pin plug, pin 5
 Notes: The BCM (Body Control Module) is below the radio.
 Horn Trigger      blue/green       -       BCM, 22 pin plug, pin 4
 Notes: The BCM (Body Control Module) is below the radio.
 Memory Seat 1      N/A
 Memory Seat 2      N/A
 Memory Seat 3      N/A
 Interface Module:      Category:
 Immobilizer Bypass      Required:
 No      Type:
 N/A
 Part #: N/A
 Notes:
 Smart Starter Kill Relays: Not Available
 
 
 warning
 This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
 Directed Electronics assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.
 
 
 
 
 -------------
 Installer, IT support, and FFL.  I need less hobbies.
 
 
 
 |