528t with air suspsension

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93579
Printed Date: May 21, 2024 at 5:02 AM

Topic: 528t with air suspsension

Posted By: awsomedude
Subject: 528t with air suspsension
Date Posted: May 03, 2007 at 10:13 AM

I have a 528t pulse timer a air ride switch box that has a negative dump trigger on it. I want to use my negative door lock wire as the trigger to the 528t and then I want to have a negative output to my switch box brain. How do I need to wire it? Basically I need a negative in and a negative out so that when I lock the truck the air dumps out.

Replies:

Posted By: KarTuneMan
Date Posted: May 03, 2007 at 10:36 AM

You could use the negative lock output to trigger a relay to send the negative trigger to your "dump" Your dump works off of a single pulse, or a latched pulse? Hopefully a single pulse. You can wire your relay like this, just re-name the connections

86 is your lock pulse, 30 is the wire needed from your dump.

-------------

Posted By: KPierson
Date Posted: May 03, 2007 at 11:04 AM

What kind of car is this? You need to make sure you isolate the (-) lock signal from the OEM lock button to prevent unexpected dumps at high speeds when your passenger locks the doors!

Otherwise, follow the above diagram and it should work.

-------------
Kevin Pierson

Posted By: awsomedude
Date Posted: May 03, 2007 at 1:42 PM

it needs a latch singal which is why I have the 528t, I have aftermarket locks on the truck so there is no auto lock feature. How long with that diagram hold? I need it to stay on for 5-8 seconds.

Print Page | Close Window