Print Page | Close Window

compustar wiring diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93645
Printed Date: May 14, 2025 at 12:57 AM


Topic: compustar wiring diagram

Posted By: airshives23
Subject: compustar wiring diagram
Date Posted: May 05, 2007 at 4:08 PM

on the compustar 2wss-as

what does the "STATUS" wire do.......its a negative wire........is that the alarm module ground?




Replies:

Posted By: JWorm
Date Posted: May 05, 2007 at 7:01 PM
No, the Ground wire is the thick black wire. The status wire is used as the activation trigger for bypass modules. It provides a ground when you hit the button to start the car. It continues to output a ground the entire time the car is remote started. Not all installations require the use of the status wire, but a majority of cars built in the last 10 years will need some type of bypass module. Do NOT connect the status wire to ground, or you may damage the unit.


Print Page | Close Window