Print Page | Close Window

pats, vats

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93757
Printed Date: May 09, 2025 at 10:45 AM


Topic: pats, vats

Posted By: mezzaricardo
Subject: pats, vats
Date Posted: May 09, 2007 at 11:03 AM

Hello

In car alarm manuals such as directed electronics products, etc. you can see in diagrams how to bypass the VATS using a relay. but, is there any way in which I could bypass my PATS from Ford motor company using a relay too? In the key cilinder I can see a little PATS module with 4 negative signal wires.

Help will be well received.

Thank you guys.



-------------
Ricardo Daniel Meza Cavazos



Replies:

Posted By: tonyberg
Date Posted: May 09, 2007 at 11:21 AM

well you can use a relay, but you still need an extra key then too...or a bypass module like the XK04 from xpresskit.com in order to get around it.   VATS is resistance based, however PATS is transponder based.




Posted By: dswift
Date Posted: May 10, 2007 at 11:31 AM
that is correcto! Which mean your going to have to by a module unless you want to lose a 70 dollar key. I suggest you use a pats modules for you vehicle. Hope you have two keys.

-------------
"dont ground out!"


Print Page | Close Window